ADVANCE DIPLOMA IN INDUSTRIAL SAFETYAND SECURITY MANAGEMENT (FF)(MSBTE) – (Practical Topics )

June 30, 2021
Posted by: admin
Category: Fire & Safety Courses

No Comments

ADVANCE DIPLOMA IN INDUSTRIAL SAFETY AND SECURITY MANAGEMENT (FF)

Course from:
MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (49, Kherwadi, Aliyawer Jung Marg, Mumbai – 400 051)

Duration

One Year

Type

Full Time

Eligibility:

Diploma In Engineering Or Technology of MSBTE Or its Equivalent or Degree in Engineering or Technology Or Any Science Graduate Or Any Graduate with 40 % Marks.

Justification: Any Diploma / Any Graduate:

As the syllabus also contains topics from Industrial Safety & Security Management, hence the person working with these qualification will be mostly placed at office job or at administrative job where he will have to take care of administration of Industrial Safety, Fire Safety and Security Management as most semi medium organization keep this three department under one head so as to reduced overhead expenses. Therefore for eligibility to this course under the head “any diploma / any graduate” is justified for eligibility

Subjects

There are total 9 subjects/practical’s that you have to study/ perform in one year Different subjects related to industrial Safety and security management are as follows.

Subjects Title	Theory/Practical
Fire Service Equipment And Appliances	Theory
Security Management	Theory
Security Acts And Laws	Theory
Industrial Safety Management	Theory
Industrial Safety Acts & Laws	Theory
Project Works	-
Practical – I Fire Fighting Drills
Practical – II Fire Service Equipment
Practical – III Rescue Technique

Subject Name: Practical –I (Fire Fighting Drills)

Group

SQUAD DRILL
LADDER
ROPE, LINE AND KNOTS

Topics

Chapter	Content
1	PRACTICAL 1: TO STUDY THE SQUAD DRILL AND TO VERIFY ITS APPLICATIONS IN FIRE SERVICES Study of Squad Drill, working of Squad Drill, Importance of Squad Drill. What is Squad, Procedure for Formation of Squad, File, Rank, Sizing, Fall In, Fall Out, Types of Cautions given to the Squad.
2	TO STUDY THE MOVEMENTS OF A SQUAD Attention, Stand at ease, Stand easy, Mark time, Double mark time, Right dress, Left dress, Dress up, Open order march, Close order march, Forward march, Backward march, Steps to the right, Steps to the left, Directions of a Squad, Turning to the left, Turing to the right, right about turn, Retire position, Advance position, Right Incline, Left Incline, Eyes right, Eyes left, Eyes front, from the right number, as you were, Proving of Parade
3	TO STUDY THE MARCHING OF A SQUAD Quick march, Double March, Slow march, Right wheel, Left wheel, Right turn, Left turn, Halt, Forward, Break up, Change direction, Change formation, Reformation of Squad, Saluting, Reporting, Getting on Parade, Inspection Parade, Guard of honor
4	TO STUDY THE FIRE SERVICE LADDERS. Types of Ladders, Their construction, Uses, Identification of parts, Care and Maintenance of ladders
5	TO STUDY THE 4 MAN EXTENSION LADDER DRILL. Equipment required, Formation of a Crew, Individual Working procedure on ‘get to work command’, Ladder pitching, Climbing, Rescue operation, Fire fighting, Ventilation procedure, Ladder carrying, Drill report
6	TO CARRY OUT STANDARD TESTS OF EXTENSION LADDER String Test, Round Test, Standing Line Test, Acceptance Test, Deflection Test extension
7	TO STUDY THE USE OF ROPES AND LINES IN FIRE SERVICE. Types and construction, Materials used in construction, Different types of Lines used in fire service for different purposes Like Rescue, Lifting, Lowering, Care and Maintenance.
8	TO CARRY OUT STANDARD TEST OF LINES. Test procedure by 6 fire personals

Subject Name: Practical –II (Fire Service Equipment)

Groups:

HOSE AND HOSE FITTINGS
EXTINGUISHERS
PUMP AND APPLIANCES

Syllabus

Chapter	Content
1	TO STUDY FIRE FIGHTING HOSES Hose Drill Actions : Lifting hose, Lowering hose, Carrying hose, Laying hose, Connect hose, Disconnect hose, Under running, Remove the kink, Rolling. Identification of different types of hose fittings and their uses.
2	TO PERFORM HYDRANT DRILLS a) 3 – man Hydrant Drill: Drill procedure with application of Hose and Hydrant Fittings: Add one length of hose, Remove one length of hose, Replace the burst Hose, Divide one line into two line using Dividing Breeching, Collect two line into one line using Collecting Breeching, Hydrant Gears and its operation b) 4 – man Hydrant Drill: Drill procedure with application of Hose and Hydrant Fittings: Add one length of hose, Remove one length of hose, Replace the burst Hose, Divide one line into two line using Dividing Breeching, Collect two line into one line using Collecting Breeching, Hydrant Gears and its operation,
3	TO CARRY OUT STANDARD TESTS OF FIRE FIGHTING HOSES
4	TO STUDY SELECTION, OPERATION AND MAINTENANCE OF FIRE EXTINGUISHERS. Study of different types of Fire Extinguishers (Water Expelling type, Foam type, DCP type, CO2 type) With respect to constructional feature, capacity operation and use. in fires, It’s effective application in extinguishments, Recharging procedure, Care and Maintenance, Performance test, Hydraulic test, Inspection procedure – Weekly, monthly, quarterly, half yearly, yearly.
5	TO PERFORM PUMP DRILL AND FIRE TENDER DRILL a) 6 – man Trailer Pump Drill: Study, Workings, Importance, Equipment, Drill Procedure. Individual working of No.1 to No. 6, Application of different types of signals applied during pump operation. b) 6 – man Water Tender Drill: Mounting procedure, Dismounting procedure, Individual working procedure like – working with ladder, working with B.A. set, Soft suction, Hard suction.
6	STUDY OF CENTRIFUGAL PUMP AND ITS OPERATION: Operational procedure of centrifugal pump, Priming system, Reading of gauges – Vacuum gauge, Pressure gauge, Compound gauge, Operator’s fault, Cooling system, Water relay and its types.
7	STUDY OF FOAM & FOAM MAKING BRANCH PIPES Protein Foam , Aqueous Film Forming Foam ( AFFF), Foam Making Branch 5X (FB 5X) , Foam Making Branch 10 X (FB 10X) , Inline inductor, Pick –up – tube.

Subject Name: Practical –III (Rescue Technique)

Group:

BREATHING APPARATUS SET
SMALL GEARS
FIRST AID

Syllabus

Chapter	Content
1	TO STUDY BREATHING APPARATUS SET Study, Working, Identification of different parts of BA, Donning Procedure, Pre-Entry , Test, BACO, Tally, Searching operation procedure with Guide Line and Personnel Line, Entrapped Procedure, Use of Y manifold.
2	STUDY OF SMALL GEARS USED IN FIRE SERVICE Grouping of Small Gears with examples – Fireman Axe, Ceiling Hook, Drag Hook, Fire Beater, Door Breaker, Steel Shod Lever, Pad Lock Remover, Persuader, Spreader, Cutter, Bending Bar, Quick Release Knife, Shears, Bolt Cutter, Search Light, Focusing Light. Study of hydraulically operated small gears and their use in Rescue Operation. Care and Maintenance of Small Gears.
3	BANDAGES AND THEIR RESPECTIVE USES Rolling Bandages: width of roller bandage, Application: Simple spiral, Reverse spiral Figure of Eight, Triangular Bandages: For the Scalp, for the forehead, Eye, cheek or any part which is round in shape, Front or back of the chest, For the shoulder, for the elbow, for the hand, for the hip and groin, For the knee, for the foot, Stump, Types of Slings and its application: Arm Sling , Collar and Cuff Sling, Triangular Sling. Improvised Sling.
4	RESUSCITATION PROCEDURES Methods of artificial Respiration like: Holger Nielson Method, Schaefer’s Method, Silvestor’s Method, Mouth to Mouth, Eve’s Rocking stretcher Method, Emerson Method. TO PERFORM DRILL FOR TRANSPORTATION OF CASUALTIES 4 – man stretcher drill: Aim, Objectives, Equipment, Drill procedure by individual No.1 to No.4 Rescuer, Loading Casualties to the Ambulance.